Who installs Every Room Closed, and what the install involves
Every Room Closed, a front-desk door board, is installed by Humanizing IT for motels and independent hotels in the United States. The installer fits a wireless sensor to every guest-room door, sets up the console, and opens the board on your front-desk PC. Other installers can offer it under their own name.
Who does the install?
Humanizing IT builds Every Room Closed and installs it. Humanizing IT works with motels across the United States. How the install is done depends on where the property is, so give your state when you ask for a quote. Other IT, camera and low-voltage installers can sell and install the same board under their own name through the white-label option. See the installer page.
What are the steps, from quote to working board?
The install runs in this order:
- You ask for a quote. Send the property name, the number of guest rooms and the state.
- The property is surveyed. The installer counts doors, looks at the doors and frames, and tests the sensor signal from the farthest room. The installer also checks where the equipment can go.
- You get a written quote. It sets out the equipment, the work and the dates.
- The equipment is prepared. Each sensor is named with its room number and the board is tested before the visit.
- Sensors go on the doors. One sensor per guest-room door. Each door is opened and closed while someone watches the board.
- The alarm is tested. A room is checked out, its door is closed, the room arms, and the door is opened. The board should show the alarm with the room number.
- The manager sets the rules and the PIN. The rules are how long a door may stand open before the board flags it, and how soon a room arms after checkout.
- Staff are shown the board.
- You sign the handover sheet. It lists what was fitted and what was tested.
What do you need to provide?
You need to provide four things:
- Power and a wired network port for the console. It sits with your network equipment. A battery backup for it is worth having. The written quote says exactly what is needed.
- A room list. Every guest-room door and its number, with any suites that have two doors.
- A time when the doors can be reached. The installer needs to open and close each door.
- A screen for the front desk. A PC or tablet you already have is fine. The board opens in a browser.
It also helps to know who manages your network, and whether you have UniFi equipment already.
What changes for guests and staff?
For guests, one thing changes: there is a small sensor on the room door. The sensor reports door open or door closed and nothing else. There is no video and no audio. Rules on guest notice differ by state and city, so ask your own attorney what to post.
For staff, the front desk presses Check out on the board when a guest leaves. The room then arms itself 2 minutes after the door closes. Before housekeeping enters an armed room, the front desk presses Housekeeping in room. When an alarm shows, your own staff go and check the room. No one watches the board from off the property.
What stays the same?
Your locks, keys, Wi-Fi and cameras stay as they are. Every Room Closed uses its own sensor on each door and does not connect to the lock. The sensors are wireless and run on batteries, so there is no new wiring to the rooms. The console sits beside your current network. The board stays on the staff network and is kept off guest Wi-Fi.
How are staff shown the board?
The installer stands at the front desk with the staff and uses a real empty room. The session takes about 10 minutes. Each person checks a room out, watches it arm, sees an alarm, and presses Acknowledge. The installer also shows housekeeping mode, check-in, the other alerts, and what a grey screen with a red banner means. A one-page staff guide is left at the desk.
What happens after the install?
After the install, the board itself tells you when a sensor needs attention.
- Batteries. The board shows each sensor's battery level and warns at 15 percent. Spare batteries are left at the property, and staff are shown how to change one.
- A sensor going offline. The room is flagged as Sensor offline with the time of its last report. That room will not arm until the sensor is back.
- Support. The monthly fee covers the software, updates, and help when a sensor goes offline or something changes on your network.
- The first week. The installer checks in with the manager and adjusts the alert times if they are wrong for your property.
What is not on this page?
Some terms are set for each property and are written in your quote. These are how long the install takes, travel to your property, warranty terms and support hours. Ask for them in writing before you sign.
Connections to property management systems, the phone app, email digests, multi-site monitoring and the AI connector are new, in testing, and not yet run at a live property. They are not part of a standard install.
Questions and answers
Who installs Every Room Closed?
Humanizing IT installs Every Room Closed at motels and independent hotels in the United States. Other installers can offer the same board under their own name. Tell us your state when you ask for a quote.
Do I need to replace my locks to install Every Room Closed?
No. Every Room Closed uses its own wireless sensor on each guest-room door and does not connect to the lock. Your locks and keys stay as they are.
Does the install need new wiring to each room?
No. The sensors are wireless and run on batteries, so nothing is wired to the rooms. The console sits with your network equipment.
Do I need UniFi equipment before the install?
No. The console and the door sensors can be part of the install. If you already have a UniFi console, tell us, because it can often be used. We confirm the exact equipment for your property in the written quote.
How long does an Every Room Closed install take?
It depends on the number of doors, the door type and the number of buildings. This page does not give a time. The written quote for your property sets out the dates.
Who changes the sensor batteries?
Your staff can. The board warns when a sensor battery reaches 15 percent, spare batteries are left at the property, and staff are shown how to change one during the handover.
Next steps
Try the live demo. It is the real board running on sample rooms.
Request a quote. Send your room count and state, and we reply with a written quote. How pricing works.
Related
Pricing
Every Room Closed has a one-time install charge and a monthly fee, both set by room count. What moves a quote, what each charge covers, and what to ask.
How it works
From checkout to alarm, and what happens when a connection drops.
For installers
The white-label option, what you install, and how to get the technical detail.
For motels
What an owner or manager gets, what stays the same, and when you do not need it.
All 100 questions
Short answers about arming, alarms, housekeeping, hardware, privacy and pricing.
Still have a question?
Tell us about your property and ask it. We answer in plain words.