Get a quote

Guest-room door monitoring for motels and independent hotels

Know every door.

Every Room Closed is a front-desk door board for motels and independent hotels. A sensor on every guest-room door shows the front desk which doors are open, which are closed, and which empty rooms are armed.

Watch a night at the front desk in 60 seconds

Rooms Floor 1 Sample rooms

Illustration of the room board. Six sample rooms. Room 104 is checked out, its door closes, a countdown runs, the room arms, then its door opens and the board shows an alarm.

Closed, open with a timer, armed, and alarm. The same tiles your front desk sees.

The problem

Empty rooms are where trouble happens.

A rented room has a guest watching it. An empty room has nobody.

How it works

How it works: from checkout to armed in four steps.

  1. 01

    The front desk checks the room out.

    One press on the board when the guest leaves. If the door is still open, the room waits.

  2. 02

    The door closes and a countdown starts.

    The delay is 2 minutes unless you change it. The room stays disarmed until it runs out.

  3. 03

    The room arms itself.

    Nobody has to remember to do it. The tile shows the room is armed.

  4. 04

    If that door opens, the board raises an alarm.

    The room goes to the top of the board in red. A siren or a phone alert can be added through UniFi Protect Alarm Manager.

It also flags

  • A checked-out room whose door was left open
  • An occupied room whose door is propped open
  • A sensor that has gone offline
  • A sensor battery that is running low

Housekeeping mode. Put a room in housekeeping and it disarms while staff are inside. It arms again after the door closes. How it works in detail

A night at the front desk in 60 seconds

One sample night on a 12-room floor. Press Play, or step through it. Times are sample times.

  1. The night shift starts. Three empty rooms are armed. Every door is closed.
  2. The guest in room 108 leaves early. The front desk presses Check out. The door is still open, so the room waits.
  3. The door of room 108 closes. The 2 minute countdown starts.
  4. Room 108 arms itself. Nobody had to remember.
  5. Room 103 has a guest, and its door has been open 10 minutes. The board flags it and the clerk calls the room.
  6. The guest closes the door. The item clears.
  7. The door of room 108 opens. The room is armed, so the board raises an alarm and puts room 108 at the top.
  8. The clerk goes to check. The door is closed again. The alarm stays on the board until someone acknowledges it.
  9. The clerk presses Acknowledge. Room 108 is still armed.
  10. Morning. All clear. Every door is where it should be.

What the front desk sees

Try the front-desk door board.

This is the real front-desk board running on sample data. Click any room. Nothing here is a real property.

Live demo, sample data Open the demo full screen
  • Needs attention

    The list at the top is what needs a person, most urgent first.

  • One tile per door

    Amber means the door is open. An indigo edge means the room is armed. Red means it opened while armed.

  • Open a room

    Click a tile to see its history and to check out, arm or set housekeeping.

  • Health at the top

    The strip at the top shows whether the sensors are reporting and when they were last checked.

Is it right for me?

Six questions. A straight answer.

Some properties do not need this. If yours is one of them, the answer will say so.

Size my property

What your property would need.

Enter your room count. You get the number of door sensors and a picture of your board. No prices here: pricing is by written quote.

Built to be trusted

A board is only useful if you can believe it.

So it tells you what it knows, and it tells you when it does not know.

60 sLive, then checked again
Door changes show as they happen. Every 60 seconds the system also re-reads every sensor, so a missed event is caught within a minute.
StaleIt says when it cannot see
If the connection drops, the board greys out and says how old the data is. Old readings are never shown as live.
ArmIt will not arm blind
A room arms only when its door is confirmed closed and its sensor is reporting. If it cannot confirm, it waits.
SavedIt remembers
Room status, armed state and history are saved. They come back after a restart or a power cut.
PINStaff PIN
Checking out, arming and disarming need the front-desk PIN.
SyncEvery screen agrees
The desk PC and the back-office tablet show the same board and update together.

What gets installed

What gets installed: a console and a door sensor on each guest-room door.

  1. On every guest-room door

    A door sensor

    It reports when the door opens and closes, and nothing else. It is wireless, so no wiring goes to the rooms.

  2. One for the property

    A console

    The sensors report to it. It stays at your property, with your network equipment.

  3. On the staff network

    Any browser

    Open the board on the front-desk PC or a tablet. Nothing to install on them.

No cloud needed. Works with UniFi Protect. The system runs on the property's own network and door data stays there. The board belongs on the staff network, not on guest Wi-Fi.

Part of the Every Room Closed front-desk board with sample data, not a real property. One tile for each room on a floor. Each tile shows the room number, whether the door is open or closed, and whether the room is armed. Part of the Every Room Closed front-desk board in its dark colours with sample data, not a real property. One tile for each room on a floor. Each tile shows the room number, whether the door is open or closed, and whether the room is armed.
The room tiles as they show in a browser on the front-desk PC. Sample data. Nothing here is a real property.

Pricing

Pricing: one install, one monthly fee.

The price depends on how many rooms you have. Send us your room count and we will quote it.

One-time install, per room
Monthly fee, per room

Get a quote How pricing works

For installers

For installers: offer it under your own name.

Every Room Closed is installed by Humanizing IT. If you install networks or cameras for motels and hotels, there is a white-label option for you.

The board can show your company name in place of ours. You sell it and install it for your own customers.

FAQ

Questions motel and hotel owners ask.

All 100 questions and answers Before you buy: fair questions, straight answers

What is Every Room Closed?

Every Room Closed is a front-desk door board for motels and independent hotels. A wireless sensor on every guest-room door reports to a console at the property, and the board shows which doors are open, which are closed, and which empty rooms are armed. If the door of an armed room opens, the board raises an alarm.

Does Every Room Closed lock doors or stop someone from entering a room?

No. Every Room Closed reports what each door is doing. It does not lock, unlock or block a door. It tells the front desk that a door opened so a person can go and check.

Do I need to replace my door locks to use Every Room Closed?

No. Every Room Closed uses its own wireless sensor on each guest-room door and does not connect to the lock. Your locks and keys stay as they are.

Does Every Room Closed need the internet or a cloud account?

No cloud is needed. Every Room Closed runs at the property and the board opens in any browser on the staff network. Door data stays on the property's own network.

What happens to Every Room Closed if the connection drops or the power goes out?

If the connection to the sensors drops, the board greys out and says how old the data is, so old readings are never shown as live. It will not arm a room whose door it cannot confirm is closed. Room status and armed state are saved, so they come back after a restart or a power cut.

What gets installed with Every Room Closed?

The install is a console and a door sensor on each guest-room door. The sensors are wireless, so no wiring goes to the rooms. Every Room Closed works with UniFi Protect.

Does Every Room Closed connect to my property management system?

It can, but this part is new. A connection to property management systems is new, in testing, and not yet run at a live property. It takes checkouts through a generic checkout webhook, with adapters for some systems. The front-desk buttons keep working.

How does housekeeping work with Every Room Closed?

The front desk puts the room in housekeeping mode. That disarms the room so staff can go in and out without an alarm. When the door closes again, the room arms again.

Can Every Room Closed sound a siren or send an alert to a phone?

Yes, as an option. When the door of an armed room opens, Every Room Closed can trigger an alarm in UniFi Protect Alarm Manager, which can sound a siren or send a push notification. The alarm always shows on the board itself.

Who installs Every Room Closed and how is it priced?

Every Room Closed is installed by Humanizing IT. Pricing has two parts: a one-time install and a monthly fee. Request a quote with your room count to get a price for your property.

Request a demo or a quote

Tell us about your property.

We will reply with a price for your room count, or set up a time to walk you through the board.

Phone
Email

Name and property are required, plus a phone number or an email.

1. Your property

2. Rooms

Not sure what you need? Size my property and send the result with this request.

3. What you have today

Want a straight answer first? Take the six-question check.

4. How to reach you