How the door board works, and what happens when a connection drops
A wireless sensor on each guest-room door reports to a console at the property, and the front desk sees every door on one board. No cloud is needed. If the link to the sensors drops, the board greys out, says how old the data is, and will not arm a room whose door it cannot confirm is closed.
The steps
What happens after a guest checks out?
Every Room Closed is a front-desk door board. These are the four things it does with a room once the guest has gone.
- 01
The front desk presses Check out.
One press on the board. If the door is still open, the room waits, and the board says it will arm once the door closes.
- 02
The door closes and a countdown starts.
Two minutes, unless you change it. You can set it from 10 seconds to 15 minutes. If the door opens again, the countdown is cancelled and starts again at the next close.
- 03
The room arms itself.
Nobody has to remember. A room arms only when its door is confirmed closed and its sensor is reporting. The front desk can also press Arm now.
- 04
If that door opens, the board raises an alarm.
The room turns red, moves to the top of Needs attention as Critical, and shows the time the door opened. It stays until someone presses Acknowledge.
A night at the front desk in 60 seconds
One sample night on a 12-room floor. Press Play, or step through it. Times are sample times.
- The night shift starts. Three empty rooms are armed. Every door is closed.
- The guest in room 108 leaves early. The front desk presses Check out. The door is still open, so the room waits.
- The door of room 108 closes. The 2 minute countdown starts.
- Room 108 arms itself. Nobody had to remember.
- Room 103 has a guest, and its door has been open 10 minutes. The board flags it and the clerk calls the room.
- The guest closes the door. The item clears.
- The door of room 108 opens. The room is armed, so the board raises an alarm and puts room 108 at the top.
- The clerk goes to check. The door is closed again. The alarm stays on the board until someone acknowledges it.
- The clerk presses Acknowledge. Room 108 is still armed.
- Morning. All clear. Every door is where it should be.
Daily use
What else does the board flag?
Four more things, each with the room number.
- A door left open after checkout
- A checked-out or vacant room whose door has been open for five minutes. You can change the time.
- A door propped open
- An occupied room whose door has been open for ten minutes. You can change the time.
- A sensor that is offline
- The room shows Sensor offline with the time of its last report, and its door reads Unknown. That room will not arm until the sensor is back.
- A low battery
- The board shows each sensor's battery level and warns you at 15 percent.
- Housekeeping
- The front desk presses Housekeeping in room. The room is disarmed while staff are inside and arms itself again after the door closes.
- A new guest
- The front desk presses Check in. The room is disarmed and marked occupied. Occupied rooms are never armed.
Reliability
What happens when the internet, the power or a sensor fails?
The board tells you what it knows, and it tells you when it does not know.
- Internet downThe board keeps working
- The board, the sensors and the alarms on screen all run on the property's own network. An alert sent to a phone away from the property does need an internet connection.
- Link to sensors lostIt says so
- The board greys out, shows a red banner and says how old the data is. It reconnects by itself and then re-reads every sensor.
- Missed messageCaught within a minute
- Door changes arrive live. The board also re-reads every sensor every 60 seconds.
- Power cutIt remembers
- The sensors keep running on their batteries. The console needs power, so a battery backup for it is worth having. Room status, armed rooms and history come back when power returns.
- After a restartUnknown, not guessed
- Every door reads Unknown until the first fresh reading arrives. Old data is never shown as live.
- Arming while offlineHeld, not faked
- An arm request made while the system is disconnected is held and runs when the connection returns.
What does it not do?
- It does not lock doors. It reports what each door is doing. A person still has to go and check.
- It does not show who opened the door. The sensor knows open or closed, and nothing else.
- The board makes no sound. For a siren or a phone alert, add one through UniFi Protect Alarm Manager.
- Checkouts are pressed at the front desk. A connection to property management systems is new, in testing, and not yet run at a live property. The front-desk buttons keep working. See where integrations stand.
- There is no cloud view. The board lives on the property's own network.
Where to go next
Still have a question?
Tell us about your property and ask it. We answer in plain words.