Get a quote

100 questions

Questions motel and hotel owners ask about door monitoring

Short answers to the questions owners and general managers ask most about Every Room Closed, a front-desk door board. Each answer says what the board does today. Where something is planned and not yet available, the answer says so.

The basics

What is Every Room Closed?

Every Room Closed is a front-desk door board for motels and independent hotels. A wireless sensor on every guest-room door reports to a board at the front desk. The board shows which doors are open, which are closed, and which empty rooms are armed.

What problem does it solve?

It tells the front desk when the door of an empty room opens. It also shows doors left open after checkout, doors propped open in occupied rooms, and sensors that need attention.

Who is it for?

It is made for motels and independent or economy hotels, where one person at the front desk often looks after the whole property. It works for any property that wants to see every guest-room door from one screen.

What is guest-room door monitoring?

Guest-room door monitoring means a sensor on each room door reports open or closed to one place, so staff can see every door without walking the corridor. Every Room Closed adds room status on top, so the board knows which rooms are meant to be empty.

What is a vacant room alarm?

A vacant room alarm is an alert raised when the door of an empty room opens. In Every Room Closed, a room arms itself after checkout once the door has closed, and the board raises an alarm if that door opens again.

Does it lock doors or keep anyone out?

No. Every Room Closed reports what each door is doing. It does not lock, unlock or block a door, so a person still has to go and check.

Do I need to replace my locks?

No. Every Room Closed uses its own sensor on each door and does not connect to the lock. Your locks and keys stay as they are.

Is it a camera system?

No. The sensors report door open or door closed and nothing else. There is no video and no audio.

Who makes it and who installs it?

Every Room Closed is built and installed by Humanizing IT. Other installers can also offer it under their own name.

Can I try it before I buy?

Yes. The live demo on the website is the real board running on sample rooms. Click any room to open and close its door and watch what the board does.

Checkout and arming

How does a room get armed?

The front desk presses Check out for the room. The board waits for the door to close, counts down, and then arms the room on its own.

How long after checkout does a room arm?

Two minutes after the door closes, unless you change it. The delay can be set anywhere from 10 seconds to 15 minutes.

What if the door is still open when I check the room out?

The room waits. The board shows that the room will arm once the door closes, and the countdown starts only after it does.

What if the door opens again during the countdown?

The countdown stops and the room stays disarmed. It starts again the next time the door closes.

Can the front desk arm a room by hand?

Yes. Open the room on the board and press Arm now. The door has to be closed and the sensor has to be reporting.

Why will a room not arm?

A room will not arm while its door is open, while its door state is unknown, or while its sensor is offline. The board tells you which of these it is.

How do I disarm a room?

Open the room on the board and press Disarm, or check a guest in. Checking a guest in disarms the room.

What happens when a new guest checks in?

The front desk presses Check in and the room is disarmed and marked occupied. Any alarm on that room is cleared.

Are occupied rooms armed?

No. Occupied rooms are never armed, so a guest coming and going does not raise an alarm.

Does it take checkouts from my property management system?

It can, but this part is new. A connection to property management systems is new, in testing, and not yet run at a live property. It takes checkouts through a generic checkout webhook, with adapters for some systems. The front-desk buttons keep working.

Alarms and alerts

What happens when the door of an armed room opens?

The room turns red on the board, moves to the top of the Needs attention list as Critical, and shows the time the door opened. If you have set up a siren or phone alert, that fires too.

Does the board make a sound?

No. The board shows an alarm on screen. For a siren or other sound, add one through UniFi Protect Alarm Manager, which Every Room Closed can trigger.

Can I get an alert on my phone?

Yes, through UniFi Protect. Every Room Closed triggers an alarm in UniFi Protect Alarm Manager, and that can send a notification to a phone.

How do I clear an alarm?

Press Acknowledge once someone has checked the room, or press Disarm, staff inside if your own staff opened the door. The alarm stays on the board until one of these is pressed.

What other alerts does the board raise?

Four more. A checked-out or vacant room with its door left open, an occupied room with its door propped open, a sensor that has stopped reporting, and a sensor with a low battery.

How long before a door left open becomes an alert?

Five minutes for a checked-out or vacant room and ten minutes for an occupied room. You can change both times on the board.

Will the board alarm all day?

It should not. A room only arms after checkout and after its door has closed, and housekeeping can disarm a room while they work. An alarm means the door of an empty room opened.

Can I snooze an alert?

Yes. Door-open alerts can be snoozed for 10 minutes, a sensor-offline alert for an hour, and a low-battery alert for a day. An alarm on an armed room cannot be snoozed; it has to be acknowledged.

Can it use motion sensors as well as door sensors?

Yes. If a UniFi Protect motion sensor is named with a room number, motion in that room while it is armed raises an alarm.

What if someone tampers with a sensor?

If the sensor reports tampering, the board logs it in the activity list as a critical event with the room number.

Housekeeping and daily use

How does housekeeping get into an armed room?

The front desk presses Housekeeping in room. The room is disarmed while staff are inside and arms itself again after the door closes.

What if housekeeping forgets to tell the desk?

The board raises an alarm when the door opens. The front desk presses Disarm, staff inside, and the room arms again once the door closes.

What does the front desk see at a glance?

Four numbers across the top: items that need attention, doors open now, empty rooms not armed, and sensors reporting. Below that is the list of items to act on and every room by floor.

Can I filter the rooms?

Yes. The board has filters for doors open, checked out, armed, empty and not armed, and rooms with issues.

Can I mark a room out of order?

Yes. An out-of-order room is disarmed and greyed out. When it returns to service it arms itself once the door is closed.

Can I see what happened in one room?

Yes. Open the room to see its recent history: door opened, door closed, armed, disarmed, alarms and who acted from the front desk.

How much history does it keep?

The board shows the most recent 50 events for each room and the most recent 200 events for the property. A long-term door history is also kept for 13 months by default and can be exported. The long-term history is new and in testing.

Can I use it on a tablet or phone?

Yes. The board opens in any modern browser and fits a phone, a tablet or a desktop screen, as long as the device is on the staff network. A separate phone app is new, in testing, and not yet run at a live property.

Can more than one screen show the board?

Yes. Every screen shows the same thing and updates together, so the front desk and the back office always agree.

Does it work in the dark at the night desk?

Yes. The board follows the device's light or dark setting, so it can run dark on the night shift.

Hardware and installation

What gets installed?

A console and a door sensor on each guest-room door. The board itself opens in a browser you already have.

Which sensors does it use?

Wireless, battery-powered door sensors that work with UniFi Protect. We confirm the exact equipment for your property in the written quote.

How many rooms can it cover?

Every guest-room door gets its own sensor, so the install follows your door count. We confirm the exact equipment for your property in the written quote.

What batteries do the sensors use?

It depends on the sensor type. We confirm the exact equipment for your property in the written quote. The board shows each sensor's battery level and warns you when one is low, with the room number.

Will it work if my rooms are spread across several buildings?

That is checked before you buy. The installer tests the sensor signal from the farthest room. We confirm the exact equipment for your property in the written quote.

Do I need to have UniFi equipment already?

No. The console and the door sensors can be part of the install. They sit beside your current network.

I already have a UniFi console. Can you use it?

Often, yes. Tell us what you have when you ask for a quote. We confirm the exact equipment for your property in the written quote.

Where does the board run?

On the property's own network. Staff open it in any browser on the staff network. No cloud is needed.

Do I need new wiring to each room?

No. The sensors are wireless and run on batteries, so nothing is wired to the rooms. The console sits with your network equipment.

How are room numbers set up?

Each sensor is named with its room number, for example Room 104, and the board reads the number from the name. Unusual room names can be mapped by hand.

Reliability, power and network

Does it need the internet?

No. The board, the sensors and the alarms on screen all work on the property's own network. An alert sent to a phone away from the property does need an internet connection.

Does it need a cloud account?

No. Every Room Closed runs on the property's own network and keeps its data at the property.

What happens if the connection to the sensors drops?

The board greys out, shows a red banner, and says how old the data is. It reconnects by itself and then re-reads every sensor.

Could the board show old information as if it were live?

No. When the connection is lost the board says so and marks the data as last known. After a restart every door reads Unknown until the first fresh reading arrives.

What happens in a power cut?

The sensors keep running on their batteries. The console needs power, so a battery backup for the equipment that sits with your network is worth having. Room status, armed rooms and history are saved and come back when power returns.

What if a door opens and the board misses the message?

Door changes arrive live, and the board also re-reads every sensor every 60 seconds. A missed message is caught within a minute.

What happens when a sensor goes offline?

The room is flagged as Sensor offline with the time of its last report, and its door shows as Unknown. That room will not arm until the sensor is back.

What if I try to arm a room while the system is disconnected?

The request is held and runs when the connection returns. The board will not arm a room whose door it cannot confirm is closed.

How do I know the system is healthy?

The top of the board shows the connection to the console, whether live updates are running, how many sensors are reporting, and when the last full check ran.

Can it be watched by an uptime monitor?

Yes. The software has a health address that reports whether it is connected to the sensors, which most monitoring tools can check.

Privacy and security

What does a sensor know about my guests?

Only whether the door is open or closed. It does not know who opened it, and it does not see or hear anything.

Where is the data kept?

At your property, on your own network. The board does not need a cloud service.

Do I have to tell guests about the sensors?

Rules differ by state and city. Ask your own attorney about any notice you should post. We are not lawyers and cannot advise on this.

Can guests see the board?

Not if it is set up as intended. The board should be kept on the staff network, never on guest Wi-Fi or the open internet.

Who can arm and disarm rooms?

Anyone at the board who knows the staff PIN. Viewing the board needs no PIN; checking out, arming, disarming and changing rules do.

What happens if someone guesses at the PIN?

After five wrong tries from one device, that device is locked out for a minute.

Does each staff member get their own login?

No. There is one staff PIN for the property. The history shows that the front desk acted, not which person.

Can I see the board from home?

Not by default. The board lives on the property's own network. Seeing it from off the property depends on a secure tunnel set up by the installer. A phone app is new, in testing, and not yet run at a live property.

Can I see several properties on one screen?

Each property has its own board. Multi-site monitoring is new, in testing, and not yet run at a live property. It depends on a secure tunnel set up by the installer.

Does Every Room Closed see payment or guest records?

No. It does not connect to your payment system. The property management system connection, which is new and in testing, passes check-ins and checkouts. It can show a guest's last name on the board, and that can be turned off. Without it, a guest's name appears only if the front desk types it in.

Compared with other options

My locks are electronic. Do they already do this?

Some online lock systems can report a door left ajar. Ask your lock supplier two things: are your locks online today, and does the front desk get an alert when the door of a checked-out room opens? If both are yes, you may not need this.

Why not just watch the cameras?

Cameras show what happened if someone is watching at that minute or goes back through the footage. The board tells the front desk which room, the minute an empty room's door opens. The two work well together: the board says which room and when, the camera shows who.

Why not just fit door closers?

A door closer shuts the door behind the guest, which helps with doors left open. It does not tell you when the door opens again. If doors left open are your only problem, a closer on each door may be enough.

Could I use a home alarm kit?

A home alarm kit can tell you a door opened. It does not know which rooms are checked out, it will not arm a room by itself after checkout, and it has no board made for a front desk.

Could I set this up myself with UniFi Protect?

You can get an alert when a sensor opens. You would still need something to track which rooms are checked out, arm each one after its door closes, handle housekeeping, and show it on one screen. That is what Every Room Closed does.

Is this the same as hotel energy management?

No. Energy systems use door and occupancy sensors to control heating and cooling. Every Room Closed uses door sensors to tell the front desk about empty rooms.

Is this a panic button system?

No. Panic buttons protect staff. Every Room Closed watches room doors. They do different jobs.

Does it replace a night guard or walking the property?

No. It tells one person at the desk which door to go and check. Someone still has to go.

My property management system shows room status. Is that not enough?

Your property management system shows what was entered into it. The board shows what each door is doing right now. Comparing the two is useful.

Does it work with brands of sensor other than UniFi?

Not today. Every Room Closed works with UniFi Protect entry sensors.

Buying, pricing and support

How is it priced?

There is a one-time install charge and a monthly fee. Both depend on the number of rooms. Send us your room count and we will send a written quote.

What does the install charge cover?

The console and the door sensors, fitting a sensor to each door, setting up the board, and showing your staff how to use it.

What does the monthly fee cover?

The software, updates, and help when a sensor goes offline or something changes on your network.

Will it stop squatters?

It depends what you mean. If someone opens the door of an empty, armed room, the front desk knows which room at that minute. It does nothing about a guest who checked in and will not leave or pay; that is a legal matter.

Will it catch staff renting rooms off the books?

It will not catch anyone. It keeps a record of when each door opened and closed, and it alarms when an armed room's door opens. If a room marked empty shows door activity, that is a question you can ask.

Will it lower my insurance?

We do not know. We have found no insurer guidance on this. Ask your agent.

Do you install anywhere in the US?

We work with motels across the US. How the install is done depends on where you are, so tell us your location when you ask for a quote.

How do I get a quote?

Use the form on the website. Tell us the property name, the number of rooms and the state, and we will reply with a written quote.

What do I need to tell you for a quote?

The number of guest rooms, how the buildings are laid out, what kind of doors you have, and whether you already use UniFi equipment.

Can I talk to another owner who uses it?

Every Room Closed is installed at working properties. We do not share another owner's details without their permission, but we can ask one to speak with you.

Installers and technical

Can installers resell Every Room Closed?

Yes. There is a white-label option for IT, camera and low-voltage installers who serve motels and hotels.

How does white label work?

The board shows your company name in place of ours, followed by Powered by Every Room Closed. The installer line at the foot of the board can be changed to your name or removed.

How does it connect to UniFi Protect?

Over the property's own network. It takes live door events and re-reads every sensor every 60 seconds. The setup steps are in the installer documentation. Ask us for it.

How is the software deployed?

That is covered in the installer documentation. Ask us for it. For the owner, the install is a console and a door sensor on each guest-room door.

Is there a demo mode?

Yes. The software can run in demo mode with 48 simulated rooms, so you can show it without any sensors.

Does it have an API?

Yes. It covers room state, room actions such as check out and arm, alert rules, and connection health. Actions need the staff PIN. Ask us for the installer documentation for the details.

How does it trigger sirens and notifications?

It calls a webhook in UniFi Protect Alarm Manager when an armed room's door opens. You choose the actions there. If the console does not answer, it tries up to four times.

How does it match sensors to rooms?

It reads the room number from the sensor name, such as Room 104 or 104 Door. Names that cannot carry a number are mapped in the config file by sensor ID or exact name.

Is the board served over HTTPS?

Not by default. The board is meant to stay on the staff network. Ask us for the installer documentation if you need HTTPS.

What is new, and what is not built yet?

Individual staff logins are not built yet. Property management system connections, long-term history with export, a phone app, weekly and monthly email digests, multi-site monitoring and an AI assistant connector are new, in testing, and not yet run at a live property. Ask us where each one stands.

Still have a question?

Tell us about your property and ask it. We answer in plain words.

Get a quote Try the board Is it right for me?