Get a quote

Door monitoring for independent and economy hotels

Every Room Closed, a front-desk door board, gives an independent or economy hotel a live view of every guest-room door without an online lock system. A wireless sensor on each door reports open or closed. Checked-out rooms arm themselves once the door closes. Your locks stay as they are. Checkouts are pressed at the front desk.

This page is for the owner or general manager of a hotel with 60 to 120 rooms. You have interior corridors, a housekeeping team, electronic locks and a property management system. You may answer to a brand. The board works the same way at 30 rooms and at 120. The questions around it change.

My locks are electronic. Do they already cover this?

Some do. Ask your lock supplier before you ask us.

Electronic locks come in two kinds. An offline lock keeps its record inside the lock, and someone has to go to the door to read it. An online lock sends events to the front desk as they happen. Some online lock systems can report a door left ajar.

Ask your lock supplier two questions:

  1. Are our locks online today?
  2. Does the front desk get an alert when the door of a checked-out room opens?

When your locks already cover this. If both answers are yes, you may not need Every Room Closed. Your lock system also knows which key opened the door. A door sensor does not.

When they do not. If your locks are offline, or the system reports only a door left ajar and not a door that opens on an empty room, the board fills that gap. It uses its own sensor on each door. It does not connect to the lock, so nothing about your locks or keys changes.

More detail is on the page about door-open alerts without replacing your locks.

Will my brand allow it?

We do not know. Brand rules on approved vendors vary, and we have not checked any brand's rules. Check with your brand before you sign anything.

These facts may help when you ask:

  • It does not replace or connect to the door locks.
  • The sensors report door open or door closed. There is no video and no audio.
  • It runs on the property's own network. No cloud account is needed.

If your brand says no, that is the answer.

What if I have a lot of doors on several floors?

Each guest-room door gets its own sensor, so the install follows your door count.

Door count is not the only thing that sets the equipment. Walls and floors affect the wireless signal, so the installer tests it in your building before quoting. Tell us the room count, the number of floors and the layout when you ask for a quote. We confirm the exact equipment for your property in the written quote.

No new wiring goes to the rooms. The sensors are wireless and run on batteries.

How does it work with a housekeeping team?

An armed room is disarmed while staff are inside. The front desk presses Housekeeping in room. The room arms itself again after the door closes.

With a team, a housekeeper will sometimes open an armed room before the desk has been told. The board raises an alarm. The front desk presses Disarm, staff inside, and the room arms again once the door closes.

Two things to know before you plan the routine:

  • The board opens in a browser on any device on the staff network. A supervisor can use a tablet.
  • There is one staff PIN for the property. The history shows that the front desk acted. It does not show which person.

Does it connect to my property management system?

In a standard install, no. The front desk presses Check out on the board for each room.

Connections to property management systems are new, in testing, and not yet run at a live property. Do not buy on the promise of one. Ask us where it stands for your system.

Until then, the two records sit side by side. Your property management system shows what was entered into it. The board shows what each door is doing right now. Comparing the two is useful. The page on room status discrepancy explains why.

What does it not do?

  • It does not lock or block a door. A person still has to go and check.
  • It does not know who opened a door.
  • The board shows the most recent 50 events for each room and 200 for the property. Long-term history with export is new and in testing.
  • It works with UniFi Protect entry sensors and no other brand of sensor today.

Questions from hotel owners and managers

Does it work in a hotel with interior corridors?

Yes. Each guest-room door gets its own wireless sensor. Walls affect the wireless signal, so the installer tests it in your building before quoting.

Can it take checkouts from my property management system?

Not in a standard install. Connections to property management systems are new, in testing, and not yet run at a live property. The front desk presses Check out on the board.

Can the owner see it away from the hotel?

Not by default. The board lives on the property's own network. An alarm can reach a phone through UniFi Protect. A phone app and multi-site monitoring are new, in testing, and not yet run at a live property.

Do guests see or hear anything?

The sensors report door open or door closed. There is no camera and no microphone. Rules on notices differ by state and city, so ask your own attorney.

How is it priced?

There is a one-time install charge and a monthly fee. Both depend on the number of rooms. Send your room count and we will send a written quote.

See it, then get a number

Try the live demo. It is the real board on sample rooms. Check a room out, close its door, and watch the room arm.

Request a quote. Send the property name, the number of rooms, the number of floors and your state. Humanizing IT, a managed IT and low-voltage installer, will reply with a written quote.

Still have a question?

Tell us about your property and ask it. We answer in plain words.

Get a quote Try the board Is it right for me?