Get a quote

What is a vacant room alarm?

A vacant room alarm tells the front desk when the door of a room that should be empty opens. On the Every Room Closed board a room arms after checkout once its door is closed. If the door opens while the room is armed, the board raises an alarm and shows the room number.

How does a vacant room alarm work?

A vacant room alarm needs two facts: what the door is doing, and whether the room should be empty. A door sensor gives the first. Room status gives the second.

On the Every Room Closed board the steps are:

  1. The front desk presses Check out for the room.
  2. The board waits for the door to close, then counts down 2 minutes. The delay can be set from 10 seconds to 15 minutes.
  3. The room arms itself.
  4. If the door opens while the room is armed, the room turns red, moves to the top of the Needs attention list as Critical, and shows the time.

The alarm stays on the board until someone presses Acknowledge.

An example

This example uses a sample room number.

  • 11:05 AM. The front desk checks out Room 104. The door is still open, so the room waits.
  • 11:12 AM. The door closes. At 11:14 AM the room is armed.
  • 1:30 PM. Housekeeping is due. The front desk presses Housekeeping in room. The room is disarmed while staff work, and arms again after the door closes.
  • 9:48 PM. The board shows: Room 104 · door opened while armed. Someone goes to check the room.

Common confusions

  • A door-ajar alert on an online lock. A door-ajar alert tells you a door was left open. A vacant room alarm is about an empty room whose door opens. Some online lock systems report a door left ajar.
  • An occupancy sensor. Energy systems use occupancy sensors to control heating and cooling.
  • A lock or a camera. A vacant room alarm does not lock a door and does not show who opened it. A person still has to go.
  • Guest-room door monitoring. The front desk can see whether each guest-room door is open or closed. See guest-room door monitoring.
  • Armed. The state of an empty room whose door is closed and being watched for an opening.
  • Room status discrepancy. A room where the front-desk record and the housekeeping report disagree. See room status discrepancy.

What Every Room Closed does here

Every Room Closed is a front-desk door board for motels and independent hotels. A wireless sensor on every guest-room door reports to a board at the front desk, on the property's own network. The vacant room alarm is the part that arms a room after checkout and tells the front desk when that door opens. Locks stay as they are. Humanizing IT installs it.

The limits: Every Room Closed does not lock doors, and it does not know who opened a door. The front desk presses Check out on the board. A connection to property management systems is new, in testing, and not yet run at a live property.

Questions and answers

Is there a system that alarms when a checked-out room is opened?

Yes. Every Room Closed is built for that. The front desk checks the room out on the board. Once the door closes, a 2-minute countdown runs and the room arms. If the door of an armed room opens, the board raises an alarm and shows the room number.

Does a vacant room alarm make a sound?

The Every Room Closed board shows the alarm on screen and makes no sound itself. A siren or a phone alert can be added through UniFi Protect Alarm Manager, which Every Room Closed can trigger.

Will housekeeping set off a vacant room alarm?

Only if the room is still armed. On the Every Room Closed board the front desk presses Housekeeping in room first. If that step is missed, the alarm shows, and the front desk presses Disarm, staff inside.

Are occupied rooms armed?

No. Every Room Closed never arms an occupied room, so a guest coming and going does not raise an alarm.

Next steps

Try the live demo.

Request a quote. Pricing is by written quote.

Still have a question?

Tell us about your property and ask it. We answer in plain words.

Get a quote Try the board Is it right for me?